I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
Text excerpt from page 12 (click to view)
Operating Sequence
Before using your tumble dryer for the first time, we recommend to place a few damp cloths inside the appliance and dry for 30 minutes. There may be dust inside a brand new tumble dryer. Example: Press the «Change» button until the desired language appears in the display.
Drying
1. Connect the appliance. 2. Open the door (see picture).
Language ENGLISH
Temp. Spin Options Change
Sprache DEUTCH
Exit
Temp. Spin Options Change
Exit
A
Press the EXIT button to confirm the selection.
Einstellungen
P1149
P1108
Temp.
Spin
Options
Change
Exit
3. Load the items one at a time, shaking them out loosely. 4. Close the door. Please check the laundry does not get caught between the door and filter. 5. Turn the selector dial to the desired programme to switch the appliance on. To switch the appliance off turn it to «Reset/Off».
Reset/ Memory 2 Memory 1 Cooling 30 min 60 min Baby Iron dry Store dry Off Cotton extra dry Ready to wear Store dry Slightly damp Iron dry Machine iron dry Synthetic extra dry
B
All indicators on the display will appear in this language from now on. Note: If the undesired language has been set, press the «Spin and Option» buttons simultaneously for about 3 seconds in order to change the language. Follow the instructions as before. Setting the time You should set the time prior to the first drying cycle and when changing to and from daylight savings time. See «Clock setting», Menu. 6. Turn the selector dial, in order to select the desired programme. The relevant message will appear in the display. The display will show the end cycle time «Cycle end at» of the selected programme, calculated on the basis of the maximum load for each type of fabric. The START/PAUSE button light will start flashing. If the load of laundry to be dried is small, at the beginning of the cycle the display will still indicate the end cycle relevant to the maximum load.
Switching on the appliance for the first time. Language When switching on the appliance for the first time you must set the language in which you want the indicators on the display to appear. Important! If the display is not showing any language, the appliance has already been switched on once. In such case, go to the chapter «Change language» if you would like to change the language setting.