Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
The manual was properly scanned and perfectly readable. The only small problem is that I couldn't use my dear Ctrl + F to find a word I needed.
Text excerpt from page 10 (click to view)
SOMETHING NOT WORKING
Before contacting your local Service Force Centre, check the following points: Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation a charge will be made, even if the appliance is under guarantee.
Symptom
No power to the appliance
Solution
Check there is power at the socket. Check there is not a power cut by checking the household lights. Check the fuse has not blown.
The light does not come on
Ensure that the bulb is correctly fitted. Replace the bulb if it has blown. Check the door light switch is not jammed.
The temperature in the fridge or freezer section is too high
Check the thermostat control knob on the top panel is turned to the correct setting relative to ambient conditions. Check the ambient temperature is within the appliance�s operating limits, please refer to the installation section in this instruction book. Relocate the appliance if necessary.
The freezer door will not open The compressor runs continously
Has door just been opened? If so leave for a few minutes to allow the air pressure to equalise. Adjust the thermostat control knob to give correct temperature control. See �Setting the temperature�. Check that the doors are closed. Large quantities of food have recently been placed in the cabinet and/or door is frequently opened. Check that air vents is not obstructed.
Noise
Refer to normal operating sounds.
If, after the above checks, there is still a fault, call your local Service Force Centre. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. Please note that proof of purchase is required for any in-guarantee service calls.
