My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
The manual was missing 2 pages but when I presented the problem to the company they made every attempt to get the 2 pages to me, when they couldn't they refunded my money. A very pleasing and easy transaction. The manual they provided was the original, it was concise and to the point. I plan to do business with this company again when should the need arise.
The owners manual is very good. all my how to questions were answered in detail.
Text excerpt from page 9 (click to view)
Positioning the door shelves
To permit storage of food packages of various sizes, the door shelves can be adjusted in height. To make these adjustments proceed as follows: Gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required (Fig. 8). Fig. 8
In the freezer compartment however, the frost should be removed with the special plastic scraper provided, whenever the thickness exceeds 4 mm. During this operation it is not necessary to switch off the power or to remove the foods from the compartment. Do not use sharp instruments to scrape off frost to avoid damaging the appliance. If a thick layer of ice is formed it will be necessary to carry out complete defrosting as follows: set the knob (D) to «O» or unplug the appliance from the mains socket; wrap frozen food in several layers of newspaper and place the food packages in a cool place. Leave the door open. Insert the plastic scraper in the appropriate seating, place a basin underneath to collect the defrost water (Fig. 11). Fig. 11
D064
For more thorough cleaning, the top door shelf can be removed by pulling it in the direction of the arrows, then re�tting it in position (Fig. 9). Fig. 9
D068
After complete defrosting thoroughly dry the refrigerator compartment.
D066
Keep the scraper for future use. Reconnect the appliance to the power supply, start it up and, after two or three hours, replace the foods previously removed from the freezer. Important Remember that an increase in the surface temperature of already-frozen foods may signi�cantly decrease their storage life. We particularly recommend that you periodically clean the defrost-water drainage hole, located in the centre of the drainage groove in the refrigerator compartment (Fig. 10) to prevent the defrost water from overflowing onto foods stored in the compartment. Use the special cleaner provided, which you will find already inserted into the drainage hole.
Defrosting
Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, during normal use. The defrost water drains out through a trough (Fig. 10) into a special container on the back of the appliance, where it evaporates. Fig. 10
