|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
 ;
SCANNING OF HIGH QUALITY
VERY, VERY HIGH VELOCITY DOWNLOAD
VERY GOOD PRICE,
TRUE SATISFIED, THANKS
 ;
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
 ;
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
 ;
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
Instructions for totally built-in appliances Door reversal
The appliance is supplied with the door hinges on the right or on the left. To change the opening direction of the doors proceed as follows before installing the appliance. 1. Gently lay the appliance on its back with the top held away from the floor by 5-8 cm (2-3 inches) of packaging; 2. Unscrew the upper pin and remove the spacer. 3. Remove the upper door.
4. Unscrew the middle hinge and the brackets and refit them on the opposite side. 5. Refit the upper door, the upper pin and the spacer on the opposite side.
6. Unscrew the lower pin and remove the spacer and refit them on the opposite side.
Recess dimensions Height (1) 1780 mm Depth (2) 550 mm Width (3) 560 mm To ensure adequate ventilation, allow the clearances shown in figure.
50 mm
min. 200 cm
2
min. 200 cm2
D567
50
Furthermore, it is necessary that the cabinet has a ventilation recess with the following dimensions: depth 50 mm width 540 mm
540
3
2
1
PR01
16
|
|
 |
> |
|