Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
The manuel was exactly what I needed and I received it promptly. Thanks
Text excerpt from page 17 (click to view)
Building-in
Safety information for the installator
� The surround or cabinet into which the oven will be built must whithstand temperatures over 75°C. Should the furniture unit not comply with this requirement, it may be subject to warping. � Wood panels may be used as protection between the burners and the adjacent walls, provided that the minimum clearances which are given in the relevant diagrams are observed. � The minimum clearance between the opening for the building-in and the rear wall must be observed as indicated in the diagrams. � The minimum clearance between the gas hob and the extractor hood should be observed as indicated in the manufacturer's instruction of the cooker hood itself. � This appliance can be installed near other furniture units, even if their height exceeds the appliance's height, provided that a minimum clearance of 100 mm (Fig. 10) is observed and that the opposite side of the appliance meets with a piece of furniture or another appliance of the same height (Fig. 10). � Ensure that small children do not play with the package materials which have been removed from the appliance. Plastic bags may cause damage and small parts may be swallowed.
