Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Text excerpt from page 6 (click to view)
Installation of the appliance in a �tted kitchen unit (Fig. 3)
Drill the unit using a � 2.5 mm drill (10 mm max. penetration); Fix the square �tting (1) to the appliance and apply the rubber seal; Fit the refrigerator into the space recessing it by 48 mm in relation to the unit base (Fig. 4);
13mm
Fig. 3
� 2,5
2 1 4 2 3
Fix the refrigerator with the screws (2) to the upper and lower part of the unit, after having inserted the �ttings (3) under the lower hinges; Fix the square �tting (1) to the unit column. Snap the ventilation grid. Insert the hinge cover (4).
4 2 3
D612
Fig. 4
48mm
D583
Instructions to assemble the refrigerator door to the kitchen unit door
Position the runners (C) at the top and bottom of the inside of the kitchen unit as shown in Fig. 5 and mark the position of the external holes. After preparing the holes, screw the runners to the kitchen unit door using 3.5x16 mm screws.
D135