Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Text excerpt from page 7 (click to view)
Using the Appliance
Before Use
Remove all packaging and securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0,5 litre of water). Do not use soap or detergent as the smell may linger. Dry thoroughly. Do not use detergents, abrasive powders, highly perfumed cleaning products, wax polishes or products containing alcohol.
To Start the Appliance
1. Allow the appliance to stand for 2 hrs after installation. 2. Plug in the appliance and switch on at the mains supply.
Thermostat Control
The temperature within the freezer is controlled by the thermostat situated on the control panel. 0 = Off Turning the thermostat clockwise makes the temperature progressively colder.
Freezing Fresh Food
It is important that fresh food placed in the freezer is frozen quickly and that the food already in the freezer is heated as little as possible. If more than 3-4 kg of food is to be frozen: 1. Switch on the freezer switch (pops up and lights by pressing) 4 hours before freezing food of small quantities and about 24 hours before freezing products of larger quantities. This time the compressor operates continuously to reach the temperature necessary for freezing. 2. Place in the foods to be frozen and let the appliance operate for about 24 hours as written above. 3. Then push the fast freezer switch again (the yellow light will go out and the switch turns to its original position).
