ZANUSSI ZV130E
Owner's Manual

MAINTENANCE
Before carrying out any maintenance operation, always disconnect the plug from the wall socket. Warning This appliance contains hydrocarbons in its cooling unit maintenance and recharging must therefore only be carried out by authorised technicians.

Defrosting
The freezer compartment will become progressively covered with frost. This should be removed with the special plastic scraper provided, whenever the thickness of the frost exceeds 1/4". During this operation it is not necessary to switch off the power supply or to remove the foodstuffs. However, when the ice becomes very thick on the inner liner, complete defrosting should be carried out and it is advisable to carry out this operation when the appliance is empty. To carry out complete defrosting proceed as follows: 1. Remove any stored food, wrap it in several layers of newspaper and put it in a cool place. 2. Turn the thermostat control � to the «q» setting. 3. Leave the door open and insert the plastic scraper in the special location to act as an extension channel; pull out the drawer to collect the defrost water (see Fig.). 4. When defrosting is completed, dry the interior thoroughly. Keep the scraper for future use. Warning Never use metal objects for defrosting your appliance as it may get damaged. Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer. A temperature increase of the frozen food shortens its safe storage period.

PR001

Periodical cleaning
Wash the interior of the appliance with lukewarm water and sodium bicarbonate. Clean cabinet outer surfaces with a silicone-wax spray. The condenser and compressor should be cleaned using a brush or a vacuum cleaner. This latter operation will maintain the appliance�s excellent standards of performance and save energy. 8