The service manual when downloaded and printed out was clear and easy to read. The manual is complete with the schematic diagram and technical data. I occasionally require a manual and now having registered with this company I shall order from them in the future.
Hello from Germany - thank you very much for the manual for my Sharp "Searcher" - the handling of your internet area is outstanding..Mike
Text excerpt from page 10 (click to view)
12 �Delay� button
This button makes it possible to delay the starting of the programme selected from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 23 hours. The delay you have selected is shown on the display for about 3 seconds; afterwards, the duration of the programme reappears. You must select this option after you have set the programme and before you press the �Start/Pause� button. The time value shown on the display will decrease by one unit every hour. You can change the delay time at any moment, before you press the �Start/Pause� button. If you have already pressed the �Start/Pause� button, and you wish to cancel the delay time, proceed as follows: � set the machine to PAUSE by pressing the �Start/Pause� button; � press the �Delay� button until the display shows the symbole «0�». � press the �Start/Pause� button again. Important! The door will be locked throughout the delay time. If you need to open the door, you must first set the machine to PAUSE by pressing the �Start/Pause� button. The door locked light goes off. After you have closed the door, press the �Start/Pause� button again.
13 Programme phase indicator lights
When you select a programme, the lights relevant to the phases that form the programme light up.
Prewash Wash Rinse Spin Drain Drying
After you have started the programme, only the light relevant to the phase that is currently being carried out will remain lit.
