Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
The owners manual for the Pioneer VSX-D603S was exactly what I needed. I received it in a timely manor and it was priced fairly. I definately will use your servise again. Thank You
To select rinses & spin, the programme must be paused, now press the Skip button once, the wash LED goes out.
Prewash Wash Rinses Spin Drain
This button makes it possible to delay the starting of the programme by up to 23 hours. The delay you have selected is shown on the display for about 3 seconds; afterwards, the duration of the programme reappears. If the button Outdoor Sports has been pressed the selected delay will correspond to the soak time. If no delay time is selected the soak programme will last about 30 minutes. You must select this option after you have set the programme and before you press the Start/Pause button. The time value shown on the display will decrease by one unit every hour. You can change the delay time at any moment, before you press the Start/Pause button. If you have already pressed the Start/Pause button, and you wish to change or cancel the delay time, proceed as follows: � set the washing machine to Pause by pressing the Start/Pause button; � press the DELAY button until the display shows the desired delay time or � press the DELAY button once, to erase the delay time. The display will indicate �0��. 0 � press the Start/Pause button again. Important! The door will be locked throughout the delay time. If you need to open the door, you must first set the washing machine to Pause by pressing the Start/Pause button. After you have closed the door, press the Start/Pause button again.
To select spin only, the programme must be paused, now press the Skip button twice. The wash & rinses LED,s go out.
Prewash Wash Rinses Spin Drain
To select Drain the programme must be paused, now press the Skip button three times, the wash - rinses spin LED,s go out.
Prewash
12 Programme phase indicator lights
When you select a programme, the lights relevant to the phases that form the programme light up. After you have started the programme, only the light relevant to the phase that is currently being carried out will remain lit.
