Very satisfied! I was searching for several days, but nope; till I discovered your webside and there it was at a very reasonable price. Keep up the good work!
Paul
Flanders
Text excerpt from page 20 (click to view)
Operating sequence
Before washing your first load of laundry, we recommend that you run a cotton cycle at 90°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.
4. Switch the machine on
To switch the machine on, press the ON/OFF button : the mains-on light comes on. The display will show three flashing dashes or a blinking zero.
0 ---
1. Place the laundry in the drum
Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
5. Select the desired programme
Turn the programme selector dial to the desired position: the lights corresponding to the different phases making up the selected programme light on.
90°
E90° E60° E40° 40° 30°
P0004
Rinse hold
30° 40° 30° 40°
60° E60°
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment . If you wish to carry out the prewash or a soak phase, pour detergent into the appropriate compartment marked .
40°
30°
6. Select the spin speed or option
Depress the spin speed button required speed or option comes on.
1200 900 700 500
to choose the
: the corresponding light
3. Measure out the additive
If required, pour fabric softener into the compartment marked , and bleach in compartment marked without exceeding the «MAX» mark.