|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
very helpful, the information in these manuels are very detailed
 ;
Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.00 of store credit for Your review.
 ;
Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.00 of store credit for Your review.
 ;
Good copy and great customer service! There was some confusion with my order and it was resolved promptly!
 ;
Having bought a pre-owned Sony FM stereo tuner through eBay, it came without any manuals. It soon became clear that to get the best from this excellent tuner I needed a decent manual because much of the operation was not intuitive to a newboy to hi fi like me. I managed to download the official Sony multi-lingual manual from Owner-Manuals.com with no problem at all - a really quick and easy service. I'm very glad I did because I found out all the operations of the tuner and was then able to not only set it up quickly but also to get much more from it that poke-and-hope trialling would ever achieve. In my book $4.99 very well spent.
INSTALLATION INSTALLATION
WARNING: Turn off and disconnect the unit before working.
1
(1) Open the grille (Fig.1) by gently pulling the arrow marked portion. Remove the air filter (Fig.2) from the front panel. Unscrew the screw fixing the front panel to the chassis. (Fig.2) Keep the screw as it will be used later.
Grille
Fig.1 Air filter
2
1
Front panel Fig.2
CAUTION: Do not open the grille extremely wide, or provide stress to the opened grille. The grille may come off, or the grille shaft may get damaged. If the grille should come off, it can be replaced. Fit one of the grille shaft into the matching hole on the front panel, curve the grille slightly and fit in the other grille shaft.
Hole
Grille shaft Front panel
2
(2) Close the grille firmly, and remove the front panel by pulling the front panel at the lower corners towards you for about 3 cm (1" ). Then lift it up and pull it towards you. (Fig.3)
Fig.3 Front panel
1
2
(1) Unscrew the 3 stopper screws of the cabinet (Fig.4). Keep the front screw and the angle as they will be used later in step 5. (2) Slide the chassis out from the cabinet by pulling on the hand hold located at the bottom center of the chassis. (Fig.4)
Cabinet
Angle
Chassis
Fig.4
16
|
|
 |
> |
|