|
There are currently no product reviews.
 ;
Good quality service manual.The scheme is on A3 format and very readable.Thank you
;
Very good service-manual with clear electrical diagrams. Thanks you.
 ;
the manual is in quite good quality and it's in pdf. manual was send in less then 6h.
;
Absolutely top, I've got now all Service-Manuals I'll need to repair my Mackie-Mixer!
;
The service manuel is very helpful, we where able to restore the device to its working operation again.
Disassembly Procedures for AJ-BS900HP/EN
1. Removal of the Front Panel
1. Unscrew the 4 screws (A), and remove the Front Panel.
4. Removal of the BS Front C.B.A.
1. 2. Loosen the 3 worm screws (A), and pull out the Knob. Pull out of the Set Up Knob.
SET UP KNOB
(A)
(A)
(A)
(A)
2. Removal of the C.B.A. Fixed Angle
1. Unscrew the screw (B), and remove the C.B.A. Fixed Angle.
3. 4.
Unscrew the 4 screws (C), and remove the connector (P1). Unscrew the 4 screws (D), and remove the BS Front C.B.A..
(D) (B) (C) (P1) (C)
(D)
3. Removal of the Card Edge C.B.A.
1. Pull the Card puller, and pull out the C.B.A. a little way. 2. Disconnect the connector (J1), and the pull out the C.B.A.
5. Removal of the Top Panel
1. Unscrew the 4 screws (E). 2. Unscrew the 4 screws (F), and remove the Top Panel.
(F)
Card Puller
(J1) (F)
(E)
DIS-3
|
