|
There are currently no product reviews.
 ;
It was a complete manual as stated. Very good source for older product manuals. Thanks
;
Scan quality is very good. Price is very reasonable. If you're looking to purchase a copy of this manual, this is the one to get.
 ;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
;
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
;
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Installing the board
5
Remove the SDI board from the F3 slot on the rear panel side of the VTR unit.
SDI board
6
Attach the accessory connector board to the rear panel. As shown in the diagram below, after passing the SDI board�s connecting cables through the hole provided for the F3 slot, plug them into the top section of the connector board and then fix the connector board in place using the screw.
SDI board�s connecting cables Rear panel
Connector board
Hole for the F3 slot
Screw
6 (E)
|
