|
There are currently no product reviews.
 ;
Found the quality of the copy excellent and a very quick service. I would certainly recommend the service.
;
Good quality, clear diagrams. Exactly what I needed.
 ;
Good product. All the information is invcluded, but due to the complexity of the amplifier, it still is difficult to get it to operation again.
;
Very professional seller; very fast, accurate and rielable service.
;
great works fine, got the manual on mail within a day
2-1
SERVICE HINTS
REPAIR POSITION COPPERSIDE REPAIR POSITION COMPONENTSIDE
To get access to the copperside of the printed board assembly proceed as follows: 1. Remove the bottom screws (4x) 2. Remove the cabinet screws (4x) 3. Lift the bottom (take care of cabinet/bottom snaps) 4. Supply the unit via external DC-socket
To get access to the componentside of the printed board assembly proceed as follows: 1. Remove the bottom screws (4x) 2. Remove the cabinet screws (4x) 3. Lift the bottom (take care of cabinet/bottom snaps) 4. Lift the printed boards and flip the main board 5. Supply the unit via external DC-socket 6. Short-circuit door-switch 1409 during measurements
POSITIONING OF SPRING-OPEN
POSITIONING OF SPRING-CD-DOOR
ROUTING OF CD-DRIVE WIRES
Remark: The spring for the CD-door is positioned loose in the cabinet assembly as shown in the picture above. It will be caught in its defined position just after mounting cabinet and bottom parts together.
|
