Very satisfied! I was searching for several days, but nope; till I discovered your webside and there it was at a very reasonable price. Keep up the good work!
Paul
Flanders
I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
Clear and easy to read. All details as expected. Price acceptable , and quick delivery.
Text excerpt from page 17 (click to view)
4. If you make the control unit output alarm signals to external devices and relate them to the alarm signals from the iris cameras or the control unit, connect the devices to ALARM OUT 1 to 8. For example, you can start alarm-related recording by connecting ALARM OUT and a recorder�s alarm input connector.
G8
G7
G
6
G
5
G4
G3
G2
G
1
ALARM OUT
Note: Alarm-related operations and alarm output timing are configurable through the administration PC. (Refer to the installation guide of the administration software.) 5. After removing the power board�s cover, connect the camera power cable to the control unit, as described in the figure.
Note: Connect the power cable and camera power cable after connecting electric locks and LAN cables to the control unit. The cables should be covered to prevent from pulling and pushing.