|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It was a complete manual as stated. Very good source for older product manuals. Thanks
;
Scan quality is very good. Price is very reasonable. If you're looking to purchase a copy of this manual, this is the one to get.
 ;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
;
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
;
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Picture
Symptom
The picture does not appear in the viewfinder.
Cause and/or corrective actions
� If VF PW-SAVE is set to ON in the menu system, the picture disappears automatically when you turn your face away from the viewfinder. m Bring your face close to the viewfinder within 1/2 inch (1 cm). Or, set VF PW-SAVE to OFF. (p. 32) � A tape in a poor condition, such as a tape recorded repeatedly, is played back with TBC set to ON in the menu system. m Set TBC to OFF. (p. 32) � Sunlight or the incandescent lamp may prevent the viewfinder sensor from working correctly. This is not a malfunction. � A tape where video game pictures are recorded is played back with TBC set to ON in the menu system. m Set TBC to OFF. (p. 32) � A tape in a poor condition, such as a tape recorded repeatedly, is played back with TBC set to ON in the menu system. m Set TBC to OFF. (p. 32)
The picture in the viewfinder does not disappear even VF PW-SAVE is set to OFF in the menu system. The picture jitters.
Others
Symptom
The supplied Remote Commander does not work.
Cause and/or corrective actions
� COMMANDER is set to OFF in the menu system. m Set it to ON. (p. 32) � Something is blocking the infrared rays. m Remove the obstacle. � The battery is not inserted with the correct polarity. m Insert the battery with the correct polarity. (p. 97) � The batteries are dead. m Insert new ones. (p. 97) � The camcorder is not malfunctioning.
Additional information / Información adicional
The CHARGE lamp flashes after you charge the battery pack installed in the camcorder. No function works though the power is on.
� Disconnect the connection plug on the battery pack or on the AC power adaptor, then reconnect it in about 1 minute. Turn the power on. If the functions still do not work, press the RESET button on the back of the battery compatment lid using a sharp-pointed object. (If you press the RESET button, all the settings including the date and time return to the default.)
AC power adaptor
Symptom
The VTR/CAMERA or CHARGE lamp does not light. The CHARGE lamp flashes.
Corrective actions
� Disconnect the power cord. After about 1 minute, reconnect the power cord. (p. 7) � See the chart on the next page.
83
CCD-TR555.3-856-784-21 (E,S)
|
|
|
> |
|
