|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This schema available for me in good condition. I would highly recommend.
;
Thanks for this "hard to find" service manual.
I apreciate the good quality of scanning and the pages scanned in A3 format.
;
Helpd me mont a new carradio when prewius mont was a mess.
;
Very good service and quick service, very good quality of service manual!
;
Great tape deck manual!
I'm very positively surprised, because it is a very long manual, lot of pages, drawings, diagrams, description of how to make the alignment and adjustment procedures.
It is as good as the old "Naka" manuals from the 1970's - if somebody have seen them, they know what I mean by that.
I recommend to buy this very much !
INC
10-2. 1.5-m Adjustment VAA18001-R.3622.A � For 1.5-m adjustment, it is necessary to (re)write the adjustment firmware, so before the adjustment, be sure to (re)write the firmware. Also, after completing the adjustment, do NOT forget to restore the original product firmware. Procedure for setting Adjustment firmware 1) Save the adjustment firmware and the product firmware in any folder. 2) Start up "DscCalDi130a" and click on "Firmware" button on the main menu to write the adjustment firmware. (If the camera is activated after completing writing the adjustment firmware, "SERVICE" is indicated in red letters on LCD panel.) 3) Follow the instructions of the below [How-to]. 4) Start "DscCalDi130a" and click "Firmware" on the main menu to write the product firmware. [Preparations] � Set the Siemens star chart. � Turn the power switch of the camera to on. [Conditions] � The siemens star chart should be A3-size or larger (Copy and enlarge A4-size siemens chart included in the service manual for the usage.) � Illumination over the object should be 400 lux ± 10% � Set the siemens star chart and the camera (front surface of lens) at 150 cm ± 3 cm distance between them. [How-to] � Double click on "DscCalDi130a". � Set the siemens star chart so that it comes center of the screen by checking through the viewfinder. � Click "Focus" then "Yes". � Lens adjustment values will appear on the screen. Judgment standard: xd0=0 ± 50, xd4 = 0 ± 50, xd8 = 0 ± 50, xd13= 0 ± 50 xd19 = 0 ± 50 � Click "OK".
"Yes"
Camera ���
150cm±3cm
Siemens star chart �����
�������
Result of adjustment
- A18 ï½¥ E3700 -
|
|
|
> |
|
