|
There are currently no product reviews.
 ;
This is exactly the service manual I needed.
Complete with all schematics, partslists, PCB layouts and alignment instructions.
This manual covers both the T-4970 en T-488F Onkyo tuner.
 ;
IF PRINTED CIRQUIT BOARD WIRING VIEW WAS ONE TONE LIGHTER, THEN 5 STAR RANK HAS TO BE MY CHOISE.
;
Very usefull, good quality drawings !
Muito útil encontrei todas as informações necessárias.
;
Wanting to repair a neighbours tape recorder I needed the necessary information, it makes it easier. Although the service manual is described as "Language : English" To my dismay I found that it is entirely written in German, a language I do not understand. At least I now have the schematics which will help of sorts. I may not use this service again due to the laguage difficulty after all when it states English you do not expect it to be entirely in another language.
;
GOOD SERVICE MANUAL.I ALWAYS BUY THERE IF I FIND WHAT I AM LOKING
Audio Adjustment
3. Adjust left/right speaker balance with the 2/3 buttons.
�BAL :L 9� � �BAL :R 9� is displayed as it moves from left to right. Note:
� When the Rear Output setting is �FRT+S/W�, you cannot adjust front/rear speaker balance. (Refer to page 40.) � �FADER : 0� is the proper setting when 2 speakers are in use.
Equalizer Curve Adjustment (EQ-LOW/EQ-MID/EQ-HIGH)
You can adjust the currently selected equalizer curve settings as desired.
1. Press the AUDIO button and select the Equalizer mode (EQ-LOW/EQ-MID/EQ-HIGH) in the Audio Menu. 2. Select the band you want to adjust with the 2/3 buttons.
EQ-LOW (low) � EQ-MID (mid) � EQ-HIGH (high)
3. Boost or attenuate the selected band with the 5/� buttons.
The display shows �+6� � ��6�.
�CUSTOM�
Note:
� If you make adjustments when a curve other than �CUSTOM 2� is selected, �CUSTOM 1� curve is updated.
31
|
