|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very satisfied with received document, all is right, Thank You very much, it was a Pleasure to work with You.
 ;
great site, the most easy and fastest way to find the manual you need, no 5 star because the manual was only available in german, but I speak german as well so no problem for me.
;
thanks for this download i got a pioneer bdp-lx70a blu-ray player and it had no manual i search everywhere on the internet and came across owner-manuals.com and i found that it was so easy to find and downloaded from this site if i ever need a manual again this would be the first place that i would come too thanks guys
;
Superb! It's the original manual. We can now use our old calculator with its full function.
;
This is a very well written and comprehensive manual. It answered all our queries.
Section
Audio Adjustments
08
Fine-adjusting equalizer curve
You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (EQ LOW/EQ MID/ EQ HIGH).
Level (dB) Q=2N Center frequency Q=2W
Note If you make adjustments, Custom curve is updated.
Adjusting bass and treble
Use this function to adjust the bass and treble. The ability to select the frequency as well as the level gives you good control over the total balance of audio. ! If EQ-EX function has been selected and EQ-EX turned on and Custom selected as the equalizer curve, you can adjust bass and treble settings.
Frequency (Hz)
1 Press AUDIO and hold until frequency and the Q factor (e.g., F 80 Q 1W) appears in the display. 2 Press AUDIO to select the band for adjustment from among low, mid and high. Press AUDIO repeatedly to switch between the following functions: LowMidHighBass (bass adjustment) Treble (treble adjustment)
Adjusting bass and treble level
You can adjust the bass and treble level. 1 Press AUDIO to select Bass. Press AUDIO until Bass appears in the display.
# If the treble level has been previously adjusted, Treble will be displayed.
# If EQ-EX function has been selected and only when EQ-EX is turned on and Custom is selected as the equalizer curve, you can switch to Bass and Treble.
3 Press c or d to select the desired frequency. Press c or d until the desired frequency appears in the display. Low: 4080100160 (Hz) Mid: 2005001k2k (Hz) High: 3.15k8k10k12.5k (Hz) 4 Press a or b to select the desired Q factor. Press a or b until the desired Q factor appears in the display. 2N1N1W2W
2 Press c or d to select bass or treble. Press c and Bass is displayed. Press d and Treble is displayed. 3 Press a or b to adjust the level. Each press of a or b increases or decreases the selected bass or treble level. +6 6 is displayed as the level is increased or decreased.
English
33
En
|
|
|
> |
|
