|
There are currently no product reviews.
 ;
Good service manual,i saved from scrapping this deck,is now fully functional.Thanks.
 ;
Found this to be the manual included with the original packinging, was helpfull but did not give any detailed repair instructions.
;
Complete service manual, was very helpful in repairing this tapedeck.Thanks.
;
The service manual was a copy of the original from Wirlpool. The quality was good, all neccecary information was available including the service-codenumbers, so I could order the right part to be replaced for repair.
Downloding was no probem after the payment.
Thanks for the service!
;
Good,readable manual. I found other manuals that were not readable when it came to part ID, but the one downloaded from owner-manual.com was better than expected. I will do buisness with owner-manual.com again.
1
2
3
4
- Removing the Gear Unit
A
Move the Arm Unit to the CLOSE POSITION. (Fig.3)
1
Remove the four screws and then remove the Gear Unit. (Fig.6)
*) When you remove or intall the Gear Unit, do so with the Arm Unit in the CLOSE POSITION.
1
B
1
1
1
Gear Unit
Fig.6 - Checkpoints for the Gear Unit
C
1. When you disassemble or assemble the Gear Unit, do so with the Arm Unit in the CLOSE POSITION. Make sure that the Arm Unit is in the CLOSE POSITION by seeing the other side of the unit through the fully circular hole shown in the figure. 2. When you install the motor, fix the screws holding the motor in the direction of the arrow shown in the figure.
Gear Unit R
2
1
D
Gear Unit L
E
F
66
1 2
DEH-P9600MP/XN/EW
3 4
|
