|
There are currently no product reviews.
 ;
Owner-manuals.com is the best Possibility to give vantage HIGH CLASS Elektronic COMPONENTS
a new Life.Thanks alot for your perfekt Service.
;
I am proud of you. In the future, I benefited from your services.
;
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
 ;
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
1
2
3
4
When unplugging the cord assy, make sure to use jig GGF1539. If the antenna cable is directly unplugged without using jig GGF1539, you might damage your fingertip or fingernail.
A
- How to Remove the Cord Assy
When unplugging cord assy, hook the point of jig GGF1539 on the lid of cord assy and vertically draw out along with the engagement axis of connector.
GGF1539
1
Cord Assy
B
Fig.3
2
- How to Attach the Cord Assy
Connector
For inserting cord assy, adjust cord assy with the engagement axis of connector and insert it as vertically as possible. Do not insert the cord assy in extreme slant, as the connector might suffer damage.
C
- Removing the Grille Assy (Fig.4)
1
Remove the four screws.
1
Disconnect the connector and then remove the Grille Assy.
1
D
1 1
Grille Assy
Fig.4
E
F
90
DEH-P980BT/XN/UC
1 2 3 4
|
