|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Excellent copies.
I will use "Owner Manual" again a second time.
 ;
Very good manual for Technics SL 303. Manuale molto utile.
;
About one hour after checkout, the manual was available for download. Clear reading and detailed. Thanks
;
Excellent transaction - clean document received - Thanks a lot
;
Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
4. Remove the 3 cam caps.
8.4.2.
Removal of the Direct Frame Unit
1. Turn the drive frame unit to the indicated by arrow. (Retracting direction)
5. Pull down the plate part of master flange unit (refer to arrow(1) ), and then turn the master flange unit to counterclockwise fully (refer to arrow(2) ). 6. Remove the direct frame/drive frame/1st lens frame/2nd lens frame unit to the indicated by arrow.
2. Remove the direct frame/1st lens frame/2nd lens frame unit from drive frame to the indicated by arrow.
3. Push the 1st lens frame/2nd lens frame unit from lens front side, and then remove the 1st lens frame/2nd lens frame unit from direct frame.
25
|
|
|
> |
|
