|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Absolutely perfect! I've been trying to understand how to use all or at least some of the features of the receiver and especially the remote.
;
Copy of genuine owners/operators manual, very useful
;
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
34 EN
INITIAL SETTINGS (cont.) NOTES:
� The Controller may not work with all types of DBS receiver. � If your DBS receiver does not respond to the code, you cannot use the Controller to change satellite channels. In this case, make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start time of timer recording. � The unit can only change the satellite channel through the Controller during timer recording. � If your DBS receiver cannot be operated with a Remote (because it has no remote sensor), you cannot use the Controller to change its channels. Make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start time of timer recording. � If the unit�s memory backup expires because of a power failure, set the cable box output channel and brand again. � For customers in U.S.A.: If you are unable to set the Controller, contact JVC toll free at 1-800-252-5722.
E
Enter the DBS receiver�s brand.
A Press rt to move the arrow to �DBS RECEIVER BRAND�, then press ENTER. B Press rt to select the brand code from the following list, then press ENTER. C Press rt to move the arrow to �TEST MODE�, then press ENTER. The program currently received through the DBS receiver appears.
BRAND NAME JVC (DISH Network) ECHOSTAR (DISH Network) SONY (DSS) RCA (DSS) CODE 51 51 41 40
If the DBS receiver�s channel changes to the channel listed below for your brand, setting is complete. JVC ] 100 ECHOSTAR ] 100 SONY ] 205 RCA ] 205 Press ENTER and �DBS RECEIVER CONTROL IS ON� appears on the screen for about 5 seconds, then press ENTER.The screen in step C appears. If the DBS receiver�s channel does not change as shown above; A Press w e to move the arrow to �NO�, then press ENTER. B Repeat step E.
 $4.99 DRM10SUC JVC
Service Manual Complete service manual in digital format (PDF File). Service manuals usually contains circuit diagr…
|
|
|
> |
|
