|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
helpful manual.good service.Quick response.will use again
 ;
Speedy confirmation to my order , with elaborate instructions .
Item Email , received immediately as desired by me.
A Pleasant & Satisfying Transaction.
;
I was searching for this manual at last i got it from this web
;
What can i say but i would have been lost without your support.
Thank You!
;
Très satisfait ! envoi rapide, Grand catalogue disponible. Many thanks !
10 The Initial Setup Menu
DTS Out
� Default setting: Off � Audio DRC is not effective when listening to a disc via the digital output when Dolby Digital Out is set to Dolby Digital. In this case adjust the dynamic range from your AV amplifier/receiver.
See page 29 for more on this setting.
� If you set to On with a non-DTS compatible amplifier, noise will be output when you play a DTS disc. � When set to On, there is no analog audio output when playing a DTS DVD-Video disc. � When playing a DTS audio CD (even when DTS Out is Off), noise is output from the analog outputs. Do not play this through your amplifier and speakers. � When playing a DTS audio CD, make sure that Stereo is selected using the AUDIO button. See page 50.
Language settings
Audio Language
� Default Setting: English
96kHz PCM Out
� Default setting: 96kHz = 48kHz
See page 29 for more on this setting.
This setting is your preferred audio language for DVD discs. If the language you specify here is recorded on a disc, the recorder automatically plays the disc in that language (although this depends on the Auto Language setting�see page 83). Choose Other if you want to specify a language other than English or French (see page 84).
MPEG Out
� Default setting: MPEG = PCM
See page 29 for more on this setting.
Audio DRC
� Default setting: Off You can switch between the languages recorded on a DVD disc any time during playback using the AUDIO button. (This does not affect this setting.)
When watching Dolby Digital DVDs at low volume, it�s easy to lose low level sounds completely�including some of the dialog. Switching on Audio DRC (Dynamic Range Control) can help by bringing up the low level sounds, while controlling high level peaks. The Off setting leaves the original dynamics intact; Max �squashes� the dynamics the most. Exactly how much difference you can hear between the settings will depend on the material.
82
En
|
|
|
> |
|
