EMERSON EWC1303A
Owner's Manual

TO CANCEL AN AUTOMATIC TIMER RECORDING

2

Set �AUTO RETURN� to [ON]

� USER�S SET UP �

�

�

After setting a program; 1)Press the POWER button. 2)Repeat steps [1] - [2] on page 21 and select a program you want to cancel. 3)Press the T-PROG. CLEAR button. 4)Press the MENU button on the remote control to return to TV mode. While recording is in progress; 1)Press POWER button. 2)Press the STOP/EJECT button on the TV/VCR.

Press the PLAY/K or STOP/L button to point to �AUTO RETURN�. Press the F.FWD/B or REW/s button until [ON] appears.

RENTAL REPEAT PLAY B AUTO RETURN

[OFF] [OFF] [ON]

3

Auto Return will begin

When all the timer recordings are completed, the TV/VCR will rewind to the beginning of the recorded program(s). NOTE: � If you press the POWER button while tape is rewinding, the Auto Return will stop.

TO CHECK THE BEGIN/END TIME
1)Press the POWER button so that the RECORD indicator goes off. 2)Press the MENU button on the remote control. 3)Confirm �TIMER PROGRAMMING� is pointed. 4)Press the F.FWD/B button. The details of programs appear on the TV screen. 5)Press the MENU button on the remote control to return to TV mode.

4

Watch the recorded program

Press the PLAY button.

TO CANCEL THE AUTO RETURN MODE
Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button. If there is a power failure of any kind, the unit will retain its memory for this feature.

HINTS FOR AUTOMATIC TIMER RECORDING � Make sure the channel you want to record is prop� � � � �
erly set in advance. It is not necessary to press the RECORD button for timer recording. Recording begins automatically at the Start time. If you are recording using a Timer mode, you may not operate the unit manually. place (or you must put tape over the hole). If the erase-prevention tab is removed, the cassette will be ejected when the POWER button is pressed to off. If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediately, and the tape will be ejected.

WAKE UP TIMER
The Wake Up Timer function turns on the TV/VCR without using the POWER button after a desired period of time. NOTES: the timer.

� The erase-prevention tab on the cassette must be in

� Use the remote control for this procedure. � Clock must be set to the correct time before setting � If you want to select [TAPE], you must insert a
playback automatically on your desired time. cassette tape in the TV/VCR. The tape will start

1

Select �WAKE-UP TIMER�

AUTO RETURN
With this feature, after timer recording is finished, the beginning of the recorded program(s) can be searched for automatically.

Press the WAKE UP/SLEEP button on the remote control once, and confirm �ON/OFF� is pointed. Press the F.FWD/B or REW/s button until [ON] appears.

WAKE UP B ON/OFF TIMER TV/TAPE TIME

[ON] [TV] [12:00AM]

2

Select �TV� or �TAPE�

1

Select �USER�S SET UP�

�MENU� TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP B USER�S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH

Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to �USER�S SET UP�. Then, press the F.FWD/B button.

Press the PLAY/K or STOP/L button until to point to �TV/TAPE�. Press the F.FWD/B or REW/s button, and select [TV] or [TAPE].

WAKE UP ON/OFF TIMER B TV/TAPE TIME

[ON] [TV] [12:00AM]

- 23 -

EN
9I03