|
There are currently no product reviews.
 ;
This PDF is very comprehensive. It includes drawings, parts lists, schematics, pictures, PCB drawings, mechanical layouts, etc. for all three stackable equipment. The scans are good too. Easy to read and no smudges or black lines. I have no complaints. I will make this site my first stop for finding my service manuals.
 ;
This service manual includes drawings, schematics, exploded views, parts list, operating details, and more. Very good scans, very readable. The only thing that made it a 4 star rating was on approximately 4 scans only half of the page was scanned then the other half. I would have preferred the pages to be whole scans.
;
Good manual contains all it takes to update, repair,these types of mixers.Thanks.
;
Great service. Fast response. High quality scan. Good price.
Thank you very much!!!
Oleg S.
;
Well-scanned, complete manual. Contains the information needed for repair and maintenance.
GM-X554
Connection Diagram
Fuse (30 A) Special red battery wire [RD-223] (sold separately) After making all other connections at the amplifier, connect the battery wire terminal of the amplifier to the positive (+) terminal of the battery. Fuse (30 A) Ground wire (Black) [RD-223] (sold separately) Connect to metal body or chassis.
Grommet
RCA input Connecting wires with RCA pin plugs (sold separately).
Amplifier with RCA input jacks
External Output If only one input plug is used, do not connect anything to RCA input jack B.
Car stereo with RCA output jacks
Front side
Input Select Switch For two-channel input, slide this switch to the left. For four-channel input, slide this switch to the right.
RCA output jack
RCA input jack B RCA input jack A
Connecting wires with RCA pin plugs (sold separately). Back side Fuse (20 A) � 2
Speaker terminal
System remote control wire (sold separately) Connect the male terminal of this wire to the system remote control terminal of the car stereo (SYSTEM REMOTE CONTROL). The female terminal can be connected to the auto-antenna relay control terminal. If the car stereo does not have a system remote control terminal, connect the male terminal to the power terminal through the ignition switch.
23
|
