perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 64 (click to view)
22 EN
PLAYBACK AND RECORDING FEATURES (cont.)
Record One Program While Watching Another
Recording Features
� �:� � TV/VCR
1
During recording... � Press TV/VCR. The VCR's VCR indicator goes out. (If you are using the RF connection ( pg. 4) to view the output from your VCR, the TV broadcast being recorded disappears.) � If you are using the AV connection ( pg. 4) to view the output from your VCR, change the TV's input mode from AV to TV.
ENGAGE TV MODE
SELECT CHANNEL FOR VIEWING
Use the TV�s channel selector to set the channel you
1 4 7
0000
2 5 8 0
3 6 9
4 2
2
want to watch.
1
Display Elapsed Recording Time
1
3
Before recording starts, press 0000. The counter resets to zero and displays the exact elapsed time as the tape runs.
RESET COUNTER TO ZERO
2
During recording, press � �:� � at any time to see the elapsed time. All indications corresponding to the current status of the VCR are displayed for 5 seconds. The counter display remains on the screen indicating the elapsed time. Press � �:� � again to remove the display.
DISPLAY ELAPSED TIME ON SCREEN
� Make sure "SUPERIMPOSE" is set to "ON" ( pg. 18). � The indications are not recorded. � Each time you press � �:� �, the indication on the front display panel will also change as follows: counter reading = channel number = clock time. (Channel number is not displayed during playback.)