|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Complete manual with clear schematic diagrams and printed circuit board layouts of two variants of the headset and the transmitter an old and a new version.
Also shows how the headset and the transmitter is opened and how transmitter and receivers can be adjusted and where to measure.
I had no problems to repair the headset using this service manual.
 ;
Excellent printing quality. A complete and very useful manual with all details.
;
This is a great site. I placed my order and by the next am it was available for download. Had some problems with some missing copy on some pages. Once I brought the error to the OMC's attention, the issue was resolved. I'll come back again.
;
Mi spiace per non poter scrivere in inglese... ma sono veramente soddisfatto del servizio offerto. Grazie..!!
;
The quality of this manual is good. It has all schematics and setup information for both the MDS-B3 and the MDS-B4. The scan quality is quite good, all pages are readable, This service manual also contains scans of the operating instructions from the User manual.
ADJUSTMENT
1. Tape Speed Adjustment Settings : � Test tape : TTA - 100 (TAPE CENTER) � Test point : PHONES JACK (J1) � Adjustment location : SFR 51 � Volume : NON-CLIP (MAX - 10dB DOWN) Method : Play back the test tape and adjust SFR 51 so that the frequency is 3000 Hz ± 60 Hz. Then confirm WOW is less than 0.50%. 2. Head Azimuth Adjustment Settings : � Test tape : TTA - 330 (TAPE CENTER) � Test point : PHONES JACK (J1) � Adjustment location : Head Azimuth Adjustment Screw � Volume : NON-CLIP (MAX - 10dB DOWN) Method : Play back the test tape and adjust the screw so that the output becomes maximum and same phase.
�7�
|
|
|
> |
|
