PIONEER KEH-P7850ES
Service Manual

KEH-P7850

7.2 DIAGNOSIS 7.2.1 DISASSEMBLY
- Removing the Case(not shown) 1. Remove the two screws. 2. Remove the Case. - Removing the Cassette Mechanism Module

(not shown)
1. Remove the four screws. 2.Disconnect the connector, and then removing the Cassette Mechanism Module. - Removing the Panel Assy(Fig.1) Remove the two screws.

Disconnect the two connectors.

Disengage the stopper at two locations indicated and remove the Panel Assy.

Panel Assy

Fig.1

- Removing the Tuner Amp Unit(Fig.2) Removing the two screws.

Removing the three screws.

Removing the screw.

Unbend the tabs at two locations indicated by arrow until straight. Remove the Tuner Amp Unit.

Tuner Amp Unit

Fig.2

44