|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very good quality. Some parts are not fully readable, but the fundamental ones are fine.
;
very good quality readable manual,printed off very well.
;
The manual was very accurate for the part that I was changing, I was able to order the correct part and had no issues with the replacement procedure. However, I was expecting to have more detailed repairs for the lower drive unit.
 ;
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
;
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
Thanks Angel.
MC-V5485-00
3.12. Carbon Brush Replacement
3.12.1. Removal
1. Complete brush change on one side before starting on the other side. There are two (2) brushes located on the motor as identified. Remove the brush assembly by using a Phillips head screwdriver to remove the screw that holds the brush holder onto the motor.
NOTE: Do not drop screws into the motor.
3.12.2.
Replacement
1. Place new brush assembly on the motor.
2. Make sure that the amp terminal on the bottom of the brush assembly is inserted into the receptacle on the motor. 3. Replace the Phillips screw that was removed. 4. Repeat steps 1-3 for the other brush assembly.
17
|
|
|
> |
|
