|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
More than pleased with my prurchase, very good product for the price.
;
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
Setting the date and time
When you first use your camera, set the date and time. If these are not set, the CLOCK SET screen appears whenever you turn on your camera.
5
Set the numeric value with v/V on the control button, then press the center z to enter it. After entering the number, v/V moves to the next item. If you selected [D/M/Y] in step 3, set the time on a 24-hour cycle. Select [OK] with B on the control button, then press the center z at the desired moment to begin clock movement. The date and time are entered.
CLOCK SET 2001 / 7 / 1
OK
Y/M/D M/D/Y D/M/Y 12 : 00
AM
OK
CANCEL
1 2
POWER ON/OFF (CHG) lamp
6
CLOCK SET
Y/M/D
M/D/Y D/M/Y 10 : 30
PM
2001 / 7 / 4
OK CANCEL
3�6
OK
To cancel the date and time setting Select [CANCEL] with v/V/b/B on the control button, then press the center z.
1 2
Set the mode dial to
, S, A, M,
, SCN, or
.
Push the POWER switch in the arrow direction to turn on the power. The POWER ON/OFF (CHG) lamp (green) lights up. The CLOCK SET screen appears. When resetting the date and time once you set, set the mode dial to SET UP (page 84), and then follow the procedure from step 3. Select the desired date display format with v/V on the control button, then press the center z. Select from [Y/M/D] (year/month/day), [M/D/Y] (month/day/year), or [D/M/Y] (day/month/year).
3
CLOCK SET 2001 / 1 / 1 12 : 00
Y/M/D M/D/Y D/M/Y
AM
OK
CANCEL
OK
4
Select the year, month, day, hour or minute item you want to set with b/B on the control button. The item to be set is indicated with v/V.
CLOCK SET
Y/M/D M/D/Y D/M/Y 12 : 00
AM
2001 / 1 / 1
OK CANCEL
OK
14
15
Inserting a disc
You can use only the 8 cm CD-Rs or 8 cm CD-RWs that have these marks.
Removing the disc While sliding the lock tab to the left, slide down the disc cover OPEN lever, and open the disc cover after the cover is unlocked. Then, remove the disc as illustrated below.
1
Disc cover OPEN lever Lock tab
2
Getting started Getting started
Notes
� Before removing the disc, be sure to check that the disc is not rotating. � Do not open the disc cover while the ACCESS lamp is lit. If you do, the recorded image may be damaged or the disc may become unusable. � When writing data on a disc or connecting with a computer using the USB connection, the disc cover OPEN lever is locked.
1 2
While sliding the lock tab to the left, slide down the disc cover OPEN lever. Open the disc cover by your hand after the cover is unlocked. Place a disc with the printed side up. Push down the center of the disc until it clicks. When installing, do not push with too much force and do not touch the pickup lens.
Pickup lens
Push here Disc
3
Close the disc cover.
16
17
1-3
|
|
|
> |
|
