|
There are currently no product reviews.
 ;
It has all the information you will need to fix it. The main circuit diagram is only A4 but being a PDF, you can print it to any size - I did it on two sheets of A3 and it didnt lose any detail - just made it readable when pinned up above the bench. I've found the fault, just need to buy some obscure bits to get it going again!
I cant fault the process, I paid for the manual in the morning and it was ready to download by lunch time.
 ;
Very good copy in a 54 pages PDF archive. This is my sixth purchase here. :)
;
Another excellent buy! File too clear and explanatory.
;
A manual hard to find. It was very helpful to restore my device.
;
I am very grateful for this manual. Without it could not repair my receiver.
Using the Floppy Disk Drive
Using the Floppy Disk Drive
You can connect the floppy disk drive to the computer. (USB) connector on your
To connect the floppy disk drive
� You do not need to shut down the computer before connecting or disconnecting the
�
floppy disk drive. Before removing the FDD, see �To remove the floppy disk drive when the computer is on� .
Plug the USB cable from the floppy disk drive into the (USB) connector on the computer. The VAIO logo on the disk drive should be facing up.
Connecting the FDD
Floppy disk drive (supplied)
USB connector Attached USB cable
� To use two USB devices at the same time, plug the second device into the
(original mini USBconnector) on the left side of the computer, using the supplied conversion adapter. To boot your computer from a floppy disk you must connect the floppy disk drive to the USB port on right side of the computer as shown above.
35
|
