|
There are currently no product reviews.
 ;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
 ;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
;
Manual correct, and complete. Downloads cleanly. Format of manual was presumably difficult to PDF to A4, but works reasonably well.
;
This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
;
Fast and courteous service. Product delivered as described. Thank you.
System Settings
Setting the onscreen display language
The onscreen display language has been set to Chinese as the factory default. To change to English, the screen setting must be changed. Follow the procedures below to change the setting.
STANDBY/ ON
4
Use the 2/3 buttons to select [OPTION].
MENU 5/� 2/3 SET
STANDBY/ ON
5
Use the 5/� buttons to select [LANGUAGE], then press the SET button.
MENU 2/3 SET 5/�
Main unit operating panel
Remote control unit
1 2
Set the rear panel MAIN POWER switch to ON. The STANDBY indicator on the front panel will light red. Press the STANDBY/ON button to turn the power ON. The ON indicator on the front panel will light green. Press the MENU button to display the menu screen.
6
Use the 2/3 buttons to select [ENGLISH]. Each time the 2/3 buttons are pressed, the language alternates between those available, in the following order:
3 ENGLISH 2 3 2
System Settings English
3
7
8
With the desired language displayed, press the SET button. The selected language will be set in memory, and the screen will return to that shown in step 4. When settings are completed, press the MENU button to return to the normal screen image.
Note
When the onscreen display language is set for either INPUT1 or INPUT2, the display language for the other input will be set to the same language.
16
En
|
