|
There are currently no product reviews.
 ;
Thanks for a very good and readable servicemanual. Just what I needed as a "dinosaur technician". I really recommmend this site and will come back.
Åsbjörn
;
The manual I purchased was just what I needed. I was glad to find a site where I can find so many manuals on a wide variety of products.
;
The best diagram that I used in a long time. Everything was right on te money. It was easy and fast. Iwoiuld but again when I need a service manual.
;
The manual is great help for me, i'm happy to have it,thanks
 ;
Very pleased with manual except that a few more details in the drawings might make the job (not yet done, tut-tut) easier. Should be adequate though. Actually I didn't have to pay for this anyway as I was given credit for another item that wasn't quite complete. Good service, then.
5
6
7
8
� INPUT 2 (DVI)
A
Are approx. 500 mVp-p signals input to Pins 80 and 90 of IC7001? Waveform 28 Yes Is the voltage at Pin 3 of IC7003 3.3 V DC? Yes
No
Check the signal output equipment and its cables.
No
Is the voltage at Pin 1 of IC7003 5 V DC? No Is the voltage at Pin 1 of IC7006 7 V DC? No Failure in the DD Assy
Yes
Failure in the IC7003
B
Yes Failure in the IC7006
Are sync signals input to Pins 48 and 47 of IC7001? And is a CLK signal input to Pin 44 of IC7001? Waveform 29
No
Failure in the MAIN Assy
C
Yes Are sync signals input to Pins 7 and 9 of IC5603? Waveform 30 Yes Are sync signals input to Pins 11 and 13 of IC5605? Waveform 31 Yes
No
Failure in the IC5603
No
Failure in the IC5605
D
Are sync signals input to Pins 3 and 6 of IC5606? Waveform 32 Yes Failure in the MAIN Assy No Failure in the IC5606
E
F
PDP-507CMX
5 6 7 8
105
|
