|
Who's Online
There currently are 5128 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Quick site processing. A complete and very useful manual with all details. Thank you!
;
Quick service response. A useful and very rare service manual with all details. I recomend this service.
;
I ordered this manual sometime in the afternoon and I received it on my e-mail the same evening.
This is a fantastically good and properly scanned copy of the original manual. All pages are of the same scale and they overlap each other. It means that you can print the manual and easily make it as a convenient paper manual.
The content of the manual is fantastic. Alignment descriptions, PCB layouts and elementary diagrams are explicit and precise. I immediately found what I was looking for. Thanks to this manual and Owner-Manuals.com my amplifier is alive again. Many thanx indded!
;
The manual was well-scanned and easy to read. As an added bonus, the Operator's Manual was bundled with the Service Manual!
I'd definitely use owner-manuals.com again.
;
Finally, i found one website, where i can download this service manual , and fix my hifi. The service manual is very good, and easy to download and to print.
The following is a simple adjustment method. �Simple Adjustment� Note : Since exact adjustment cannot be performed, remember the positions of the controls before performing the adjustment. If the positions after the simple adjustment are only a little different, return the controls to the original position. Procedure:
5. Connect the osilloscope between TP (TE) and TP (VC). 6. Adjust RV703 so that the waveform is as shown in the figure below. (tracking gain adjustment) � Correct Example
VOLT/DIV : 100 mV TIME/DIV : 2 mS
0V
oscilloscope (DC range) CD board TP (FE) TP (TE) TP (VC)
� Incorrect Examples (fundamental wave appears)
low tracking gain VOLT/DIV : 100 mV TIME/DIV : 2 mS 0V
1. Keep the set horizontal. If the set not horizontal, this adjustment cannot be performed due to the gravity against the 2-axis device. 2. Insert disc (YEDS-18) and push the � button. 3. Connect the oscilloscope between TP (FE) and TP (VC). 4. Adjustment RV704 so that the waveform is as shown in the figure below. (focus gain adjustment) � Correct Example
VOLT/DIV : 100 mV TIME/DIV : 2 mS 100 mV 0V
high tracking gain (higher fundamental wave than for low gain) VOLT/DIV : 100 mV TIME/DIV : 2 mS
0V
� Incorrect Examples (DC level changes more than on adjusted waveform)
low focus gain VOLT/DIV : 100 mV TIME/DIV : 2 mS 250 mV
Adjustment Location : See page 19.
0V high focus gain VOLT/DIV : 100 mV TIME/DIV : 2 mS 100 mV 75 mV 0V
� 18 �
$4.99 PMC107 SONY Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
|
|
> |
|