|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
High quality scan of original Service Manual. Everything´s fine!
 ;
Good scan of the original service manual. All schematics and adjustment procedures are there. It helped me to fix a long lasting problem with the tracking circuitry. The manual also includes the supplementals 1,2 and 3. Included are; electrical schematic's , pcb layout's, mechanical drawing's and exploded views, disassembly manual and maintenance procedures. 236 pages.
;
The Service Manual received was helpful. The electronic information is exactly what I needed.
I recomend all of my friends about this technical page.
;
High quality scan of service manual. I am satisfied!
;
Excellent copies.
I will use "Owner Manual" again a second time.
4. 1) Then, press and hold the VOLUME DOWN button on the unit and the MOVE key on the remote for more than 5 seconds. The unit will go into the Factory Adjust Mode. (FACTORY ADJUST menu will appear.)
FACTORY M: V S F O P 0 I O A T A 3 D U N H R ADJUST 1/1
a. Mechanical Picture Position Adjustment
1) Loosen the 4 Screws on the Projection Unit.
Projection Lens Screw Screw
0780 S:0307010 EO ADJ ND ER TIAL
Screw
Twist
Twist
Screw
DEFAULT SET (SELF CHECK)
<Factory Adjust mode>
Fig. 4-4 2) Then, press the CH UP/DOWN key on the remote to select �OTHER� on menu and press the ACTION key. (OTHER menu will appear.)
OTHER 1/1 RGB1
<Front View>
Fig. 4-6 2) Adjust the Projection Lens by twisting so that the long line �g� and the long line �h� are within 4 dots. (The long line �g� and the long line �h� will be almost aligned horizontally.)
O O F G
P P P C
TH TV :00 :03
P P 0 0
O O 0 6
S S 0 3
I I 0 0
07 00 PROTEC
OPT OPT
HPOSI VPOSI
16 FE
<Factory Adjust Mode> (OTHER menu 1/1)
Fig. 4-5 5. Press the VOLUME UP/DOWN key on the remote. (Focus screen will appear.)
"G" long line "g" <Focus Screen> long line "h" "H"
OPT OPT
HPOSI VPOSI
16 FE
"G"
within 4 dots
"H"
<Focus Screen>
Note: If the Projection Lens is twisted left, the Focus Screen twists left. If the Projection Lens is twisted right, the Focus Screen twists right. 3) Tighten the 4 Screws while fixing the Projection Lens.
To release this mode: 1. After completing the ADJUSTMENT, press the CH UP/ DOWN key on the remote to return to the OTHER menu. 2. Then, press RECALL key twice to return to Work Mode, and press and hold the VOLUME DOWN button on the unit and the RECALL key on the remote for more than 5 seconds. Alternatively, turn off the power. 3. Then, install the Optical Cover with the 2 Screws and the Front Cover Unit.
|
|
|
> |
|
