perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 38 (click to view)
CONTRAST
This adjusts the contrast of the picture. (Adjust the �BRIGHT� setting first if required before adjusting the �CONTRAST� setting.) The picture is bright: I button The picture is dark: H button
White balance R/G/B (W-BAL R/G/B)
(RGB only) This is used to adjust the white areas of the picture if they appear colourised. To make the selected color lighter: I button To make the selected color stronger: H button
BRIGHT
This adjusts the darker areas (black areas) in the picture. Black areas are too light: I button Dark areas are too solid: H button
AI
ON The lamp is controlled according to the input signals to project images with the best quality. OFF �AI� is disabled. NOTE: B �AI� is disabled when �LAMP POWER� is set to �LOW�. (Refer to page 45.)
COLOR
(S-VIDEO/VIDEO/YPBPR only) The color is too deep: I button The color is too pale: H button
TINT
(NTSC/NTSC 4.43/YPBPR only) This adjusts the flesh tones in the picture. The flesh tones are greenish: I button The flesh tones are reddish: H button
SHARPNESS
To soften the picture details: I button To sharpen the picture details: H button
COLOR TEMP.
COLOR TEMP. STANDARD
[
HIGH
[
LOW
This is used to adjust the white areas of the picture if they appear bluish or reddish.
