Turns out this was not the manual i was looking for. The concertmate 670 keyboard i have is a "Realistic" model made for Radio Shack and none of the diagrams on the owners manual i received matches up. HOWEVER, I must say the service Owners Manual provides was fast and efficient by being available online. The manual was in good readable condition and easily downloaded.
Thank´s for your help, I already recived these manual from you
Text excerpt from page 14 (click to view)
Before using
Attaching the lens cap
Fit the lens cap to protect the surface of the lens. 1 Push the string through the belt. Push the lens cap through the loop in the string.
(36)
(36) Shoulder strap fixture
This is a fixture for attaching the shoulder strap to hang the Camcorder from your neck or shoulder.
1 2
3
�Put the strap through the fixture 1 and through the stopper 2 so it will not come off. Extend part 3 by at least 2 cm (1 inch). �Fit the other end of the belt similarly.
1 2
�To fit or remove the lens cap, hold both sides of the lens cap with the tips of your finger and thumb.
(37) (37) Lens hood
In order to remove the lens hood, rotate it counter-clockwise 1. In order to fit it, place into slot 2, and then rotate it clockwise.
�The lens cap removed can be attached to the lens cap fixture. (It cannot be hung if the grip belt is used as a hand strap.)
(38)
1
(38) Smart accessory shoe
The stereo zoom microphone /VW-VMH3 (optional) or the video DC light/VW-LDH3 (optional) should be mounted here. �When an accessory is attached to the smart accessory shoe, the power required to operate the accessory is supplied by the Camcorder. �When mounting or removing the accessory, extend the viewfinder (1).