This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Text excerpt from page 4 (click to view)
Assembly (continued)
4 Connect the speaker cord to the speaker
terminal.
� Each speaker can be used as front or surround speaker. Use the 5-meter speaker cords for front speakers and 10-meter speaker cords for surround speakers.
5 Route the speaker cord as shown below.
� Be sure to take out the slack so that the speaker cord lies flat.
Twist and pull the insulation coat to remove.
Press and hold the clamp.
Insert the exposed core of the speaker cord fully into the terminal.
Release your finger.
Repeat the procedure from step 1 to assemble the other satellite speakers.