|
There are currently no product reviews.
 ;
hello this Service Manual PIONER KXE60 is very good, thanks.
 ;
It was just what I needed. Thanks for your quick action and great price. You guys are top notch.
Thanks
;
Excellent manual, complete, great resolution, easy to read especially the schematics. Thank you !
;
Fast delivery, excellent resolution and complete. And above all, the best price ever !
;
Vielen Dank,
das war eine prima Sache. Habe das Serviceheft nach 3 Stunden herunterladen können. Qualität OK. Hat mir mit Erfolg bei der Fehlersuche und Reparatur meines
Nordmende Galaxy Mesa 9000 geholfen. Ich kann diesen Service bestens weiterempfehlen
A very good service.
Thank You!
SECTION 3 DISASSEMBLY
� Before disassembling the main body, lay down it first. 3.1 Removing the cabinet assembly (See Figs.1 and 2)
(1) From the bottom side of the main body, remove the four screws A attaching the stand assembly. (See Fig.1.) (CAUTION) � The speaker wire assembly is connected with the speaker terminals at this time. Be careful not to damage the speaker terminal and the speaker wire. (2) From the top side of the stand assembly, disconnect the speaker wire assembly on the speaker terminals. (See Fig.2.) (3) Remove the seven hooks a attaching the net assembly to the cabinet assembly. (See Fig.2.) (CAUTION) When removing the net assembly, be careful not to damage the speakers and the cabinet assembly. (Reference) � As the net assembly is fixed with the adhesive and the two-sided tape, remove the net assembly by using a minus driver or similar tool. � Attach the net assembly after applying the adhesive to the hooks a. (4) Remove the two screws B and screw C. (See Fig.2.) (5) Pull out the stand from the cabinet assembly while peeling off the adhesive section b. (See Fig.2.)
Hooks a
Hooks a Cabinet assembly
Net assembly
Hooks a
C
B
Adhesive section b Stand
Stand assembly
Speaker wire assembly
Speaker terminal
Speaker terminal
A
A
Fig.1
Stand assembly
Fig.2
(No.22068)1-5
|
