Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
We received the manual in a timely manner and it was exactly what we were expecting.
Text excerpt from page 7 (click to view)
STR-K740P/K840P
AUTO BETICAL MODE
* This mode is installed in the Europe models only. When this mode is used, the receiver scans the broadcasts that can be received by the tuner, and sets up the broadcasts. Be sure to start scanning after connecting the antenna. * Procedure: 1. Check that the antenna is connected. 2. Press the ?/1 button to turn on the power while pressing the MEMORY button. 3. The message �AUTO-BETICAL SELECT� appears and the receiver starts scanning.