Manual was delivered in a timely manner and was all in English as advertised. The manuals I received when we moved into our flat were in German, Italian, and French. Having never used a steamer before, and not speaking/reading German very well, I needed an English Manual. this was a huge help.
This GRUNDIG UV5A Owner Manual is not only an instruction manual but a total functional circuit description of the Multimeter and includes circuit diagram at the end pages. It is very helpful for repairing and calibrating the instrument. It is written in two languages English and German for international support. It was very easy to repair my unit with this document. Regards, Regis Pauly, Electrical Engineer.
The owner's manual was evetything I thought it would be. I was able to print it out using both sides of the paper in quick order, saving me a search online for a used one.
Text excerpt from page 17 (click to view)
B) To
Set The Timer To Switch Off Only Ensure the electricity supply is switched ON and that the correct time of day is displayed, e.g. 10.00am as Fig. 9.
i)
ii) Place food in oven. iii) To set the length of cooking time, press the cooking hours button ( ) while holding it down, turn the increase control ( + ) until the required length of cooking time is displayed, e.g. 2 hrs 15 mins as Fig. 10. Turn the decrease control (-) if necessary. iv) Release the buttons. The AUTO display will glow and the time of day will be displayed after 5 seconds. v) Set the oven temperature. vi) To check the stop time during the cooking period, simply press the stop time button ( ) and the stop time will be displayed, as Fig. 11.
Fig. 9
Fig. 10
Fig. 11
4. To Return The Cooker To Manual After An Automatic Programme To return the cooker to manual operation after an automatic programme, follow the steps given below. At the end of a timed cooking period, the AUTO light will flash and a bleeper will sound for up to 2 minutes. This can be stopped by pressing any of the buttons as Fig. 12. Turn oven control to the OFF position. The AUTO display will continue to flash. Press ( Fig.13. ) button. The AUTO display will go out as
