ZANUSSI TCE7127
Owner's Manual

The Control Panel

1

23456

7

1 Programme Chart
This will help you to select the correct programme for drying.

5 Start button
Press this button to start the dryer after having selected the programme and the options. The relevant light will stop flashing. If you have chosen a delayed start, the machine will begin the countdown. If the door of the appliance or the small door at the bottom is opened while the programme is running, this button must be pressed again after closing the door in order to restart the programme from the point at which it was interrupted. This button must be depressed also after a power failure and after having re-inserted the water reservoir, if it has been emptied in the middle of a programme after lighting up of light . In both cases the light of the Start/Pause button flashes to remind you that the start button needs to be pressed again.

2 Low Temperature Button
Pressing this button allows drying to be performed at a lower temperature, for delicate items. The corresponding pilot light comes on. This option can also be used for time controlled drying. The dryer heats at 1400 W instead of 2200 W. If the button is not pressed, drying is performed at full power (2200 W). This option cannot be selected with QUICK DRY .

3 QUICK DRY Button
By depressing this button the drying time is reduced in the following COTTON programmes: � EXTRA DRY � READY TO WEAR � STORE DRY The corresponding pilot light comes on. This option cannot be selected with LOW TEMPERATURE function.

6 Programme Phase Indicator Lights
These lights indicate the various phases of the programme as they are being performed. �Drying� light This light indicates that the appliance is in the drying phase. �Cooling� light This light indicates that the appliance is in the cooling phase. At the end of drying, there is a 10 minute cooling phase to cool the laundry. �End of programme� light This light is on at the end of the cooling phase, during the anti-creasing phase and at the end of the programme.

4 Buzzer OFF Button
A buzzer sounds by depressing the push buttons during the anti-creasing phase, at the end of programme and when the water reservoir is full. Press this button when selecting the programme if you wish to switch the buzzer off during the anticreasing phase. The corresponding light illuminates.

5