|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is a great manual. It was easy to read and very accurate. The size of the manual is small so email is no problem. I highly recommend it. The manual is very hard to find other than this website.
;
Manual was complete and available promptly, since I had lost my original manual. Very good response.
;
Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
;
excellent quality, contains circuits and scan quality, 110 pages
;
It was easy done, and I got exactly what I was looking for.
10
English
Take out the original adapter and screw the D-type adapter onto the water purifier housing. (Fig. 19) 3 Push the water purifier housing onto the tap from below and tighten the 4 screws evenly (Fig. 20). Screw the attachment nut firmly onto the water purifier housing (Fig. 21). Make sure the rubber washer is firmly pushed against the tap to prevent water leakage. Installing the filter cartridge 1 Make sure the tap is closed. Set the water selection lever to the unfiltered stream position (Fig. 22). 3 Tilt the filter cartridge 90° backwards and insert it into the water purifier housing. (Fig. 23) Pull the cartridge upwards until it is in upright position. (Fig. 24) Using the appliance 1 Make sure that the water purifier housing and the filter cartridge are properly installed. Turn the water selection lever to the desired setting (�click�). Filtered spray Select this setting for drinking, washing vegetables or fruits and for cooking. 1 Turn the water selection lever until the filtered spray symbol is aligned with the indicator (Fig. 25). Do not let water hotter than 50°C run through the water purifier at this setting, as this may damage the water purifier.
|
|
|
> |
|
