AIWA XCRW700
Owner's Manual

DISC DUBBING

4 Press DUBBING , and wait until "01 00:00" is displayed.

5

4

5 4 2 5
When "DISC FULL" is displayed There is not enough space on the disc. Use another disc.

3

2

1

5 Press c on the play deck or record deck. Alternatively, press c on the remote control.
The dubbing will stop automatically when the source disc has played through to the end. After the dubbing is finished, "BUSY" and "UPDATE" will be displayed briefly.

1 Load a blank or non-finalized CD-R/RW disc on the record tray.
After TOC and OPC process, total number of tracks and total time of all tracks will be displayed. "CD-R" or "CD-RW" will also light depending on the disc in the tray. "CD-R" lights

To stop a dubbing operation manually
Press s on the play deck or record deck. Alternatively, press s on the remote control.

To play in other machines
As with all recorded CD-R/RW discs, the disc must be finalized before it can be played in other machines. See page 18 for details.

Changing the order of tracks to be dubbed
Total number of tracks Total time of all tracks Before starting the dubbing, program the tracks so that they will be played in the desired order. See page 22 for details. � Dub containing programmed playback may only be made by real-time or 2x speed. If you attempt to make a programmed dubbing at 4x speed, the unit will automatically select the 2x speed. NOTE � Recording levels may not be adjusted during digital recordings. � It is possible to listen to the disc while it is being dubbed by selecting the appropriate input on your receiver, preamp or processor. � Do not use high volume levels when listening to highspeed dubbings while they are in progress. It may cause malfunction. � a does not operate while a dubbing is in progress. � Tracks will be added automatically to mirror the track structure of the original disc. � The total time indication of the recorded CD may vary slightly from the original due to variations in the spin speed of each drive. But no information has been lost in the recording process. � If the original disc being dubbed is a digital copy or if it contains copy-prohibit signals, the unit will automatically make a copy with real-time speed in analog mode because of SCMS (see page 26).

2 Press SPEED repeatedly to select dubbing speed.
With each press of the button, the dubbing speed changes as follows: real-time 2x speed 4x speed � The default dubbing speed is "real-time". The recording takes as long as the actual running time of the disc. � When no speed indicator lights, the unit is set to realtime recording. � Note that the slower the record-dubbing speed, the more tolerant the unit is of errors on the blank disc. However, with most high-quality blank discs, the 2x and 4x speeds should not present a problem.

3 Load the disc to be dubbed on the play tray.
After TOC process, total number of tracks and total time of all tracks will be displayed and CD will light. "CD" lights

Total number of tracks

Total time of all tracks

14 ENGLISH