|
There are currently no product reviews.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
 ;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
XV-FA900BK/XV-FA902SL 3.3.6 Removing the sub trays (See Fig.8 to 14) � Prior to performing the following procedure, remove the main tray cover and the U/D cam (U). CAUTION: Remove the sub tray assembly (4), (3), (2), (5), (6), (7) and (1) in order. When reattaching, observe the following procedure without fail. (1) Remove the sub tray (4) and (3) from the main tray upward. (2) Remove the sub tray (2) upward. (3) Similarly, remove the sub tray (5) , (6) and (7) upward. (4) At last, remove the sub tray (1) upward. --Reattaching the sub tray-(1) Reattach the sub tray (1) while fitting the part f to the groove of the ACT. gear (1) marked g. (2) Reattach the sub tray (2) while inserting the shaft h into the groove i of the main tray, and at the same time, fitting the part j to the groove of the ACT. gear (1) marked k. Move the sub tray (2) toward the tray (1). (3) Similarly, reattach the sub tray (7).
Fig.8
Fig.9
Fig.10
21
|
