|
There are currently no product reviews.
 ;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
 ;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
;
Manual correct, and complete. Downloads cleanly. Format of manual was presumably difficult to PDF to A4, but works reasonably well.
;
This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
;
Fast and courteous service. Product delivered as described. Thank you.
Editing MDs
09
3 Use the / (cursor left/right) buttons to select �Move�, then press ENTER.
4
Press ENTER again to erase the track.
Track 6?
� To cancel press instead.
Move
4 Use the / (cursor left/right) buttons to select a new track number, then press ENTER. 1
Erasing a disc
With the MD stopped, Press MD MENU and use the / (cursor left/right) buttons to select �MD Menu�, then press ENTER.
TRK 12
2?
� To cancel the edit press instead. The display shows the track you�re moving and its new number. You can't select a track number higher than the total number of tracks on the disc. The display shows Complete once the edit has been made.
MD Menu
2 Use the / (cursor left/right) buttons to select �All Erase�, then press ENTER.
All Erase
Erasing tracks
Erasing unwanted tracks on a disc frees up disc space for further recording. When you erase a track, all the tracks following it are automatically renumbered. 1 Select the track you want to erase. The easiest way to do this is by using the and buttons while the MD is stopped. 2 Press MD MENU and use the / (cursor left/right) buttons to select �MD Menu�, then press ENTER. 3 Press ENTER again to erase the disc.
OK?
� To cancel press instead.
English
MD Menu
3 Use the / (cursor left/right) buttons to select �Track Erase�, then press ENTER.
Track Erase
55
En
|
