Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
So usefull to make my installation a breeze. 5 stars on quality.
Text excerpt from page 43 (click to view)
Using and Caring for Your Oven
Using and replacing the oven light(s)
Your oven may have a standard oven light or two side halogen lights. The oven light(s) will come on when you open the oven door. To turn the light(s) on when the oven door is closed, press the Oven Light pad on the control panel. Press the pad again to turn off the light(s).
OVEN LIGHT OVEN LIGHT
Replacing oven lights (models with side halogen lights):
1. Unplug range or disconnect power. 2. Make sure the oven is cool before replacing the light bulb.
Replacing the oven light (models with light on back wall):
1. Unplug range or disconnect power. 2. Make sure the oven is cool before replacing the light bulb. 3. Remove glass light cover by grasping front edge of cover and pulling it away from the side wall of the oven. 4. Remove the light bulb from its socket. Replace the bulb with another halogen bulb (12 volt, 5 watt maximum, available at most hardware stores). 5. Replace the light cover by snapping it back into wall. 6. Plug in range or reconnect power. NOTE: The oven lights will not work during the Self-Cleaning cycle.
3. Remove the glass bulb cover in the back of the oven by turning it counterclockwise. 4. Remove the light bulb from its socket. Replace the bulb with a 40-watt appliance bulb. 5. Replace the bulb cover by turning it clockwise. 6. Plug in range or reconnect power. NOTE: The oven light will not work during the Self-Cleaning cycle.
