Very pleased with manual except that a few more details in the drawings might make the job (not yet done, tut-tut) easier. Should be adequate though. Actually I didn't have to pay for this anyway as I was given credit for another item that wasn't quite complete. Good service, then.
Very useful manuals, somewhere graphics not very clear!
Text excerpt from page 118 (click to view)
1
2
3
4
4 Traverse mechanism G11 Assy-S
A
5
Remove the DVPL Assy by removing the two screws. DVPL Assy
1
Remove the slot-in mechanism G5 Assy by unhooking the four hooks.
1 5 5 5 1 1
B
1
Bottom view
1
6
Disconnect the two connectors and three flexible cables. DVPL Assy
6 6
Slot-in mechanism G5 Assy
6
C
6
6
Bottom view
2 3 4 5 6
Remove the screw. Remove the SPCN Assy by unhooking the hook. Disconnect the spindle motor flexible cable. Disconnect the connector and the flexible cable. Remove the traverse mechanism G11 Assy-S by removing the three screws.
D
7 8 9
Remove the four float spring G11s. Remove the four dampers. Remove the slot-in mechanism section.
